Electronic Projects : Digital Code lock with LCD and Keypad using AT89C2051

Post views:

IR Remote Switch using TV remote (RC5 Protocol)

A Brief Description:
This project is written in C language. Its a simple project with efficient hacking prevention from Brute Force etc. The basic user lock is of 5 Digits and Master Lock is of 10 digits so its not easy for an intruder to break the lock unless you keep the code simple.
The input is taken from a 4x3 Keypad (please see the schematic for more information) and Display the user input on a 2x16 LCD. A pin is assigned as output for activating and deactivating the lock. For demonstration i have connected an LED to that pin.

User Side working:
The user has two options either he/she can use its own 5 digit code or use the default 5 digit code. If user has to do setup his own code, then he has to enter "12345" and press '#'. After this.. controller will ask for 10 Digit master password which is preprogrammed in the controller. Entering master lock, user can enter the new 5 digit code for the lock and press '#' to save it.

Using the Keypad:
Keypad has 12 keys (4x3) starting from 1,2,3,4,5,6,7,8,9,*,0,# (please see the schematic for layout). Numeric keys are used for entering numbers. '*' is used as the Cancel key and '#' is used as the Enter key.

Download File Information:
LCD.C - 4-Bit LCD Drivers
LCD.H - LCD function prototypes and other declerations
Lock.C - code for lock functioning
LOCK.H - lock function declerations
KEYPAD.C - Keypad drivers
KEYPAD.H - Function declerations
DELAY.C - Delay Functions
DELAY.H - Function Prototypes only
MAIN.C - Main function!
Digital Code Lock Schematic - PDF file of orcad schematic

Download the Project here :


Project Source : 8051 Projects.

You may even like these posts