WA600 Water Level Alarm Sensor

High water indicator and low level water controller

 FEATURES:
  • Rugged
  • Fully submersible
  • Available with alarm for water or air contact
  • Ideal for water spills, tank failure, pump failure, rising water, and floods

Product Description

Global Water's Water Level Alarm Sensor (WA600) is a solid state water sensor for detecting the presence of conductive solutions, such as water spills, water tank levels, and drainage ponds. The water alarm sensor features two stainless steel electrodes that are positioned at a desired point for liquid detection.  When fluid is detected, a relay closes in the water level alarm and the signal can be used to sound an audible alarm or close a switch inside a piece of remote monitoring equipment.  The relay output is fully isolated and can handle 2 amps of current.

After the water level alarm sensor is in dry conditions, the detection sensor will automatically reset without requiring additional service.  The water level alarm is rugged and durable and requires minimal maintenance.

The Water Level Alarm has many uses, including: surface water monitoring, precision level detection, water level control, high water indication, and submersible marine low level indication.  The water alarm sensor can be purchased to sound an alarm upon contact with water or air (please specify when ordering).

Specifications

Dimensions: 1" diameter x 5"
Weight: 6 oz.
Electronics: Solid state, fully encapsulated in epoxy.
Electrodes: 304 stainless steel
Cable: 4 wire shielded; 25' length (may be extended to 500')
Input Voltage: 5VDC to 36VDC
Current Draw: Continuous 27mA, Active 44 mA
Alarm Output: Switch closure, 2 Amps Maximum Isolated Relay