Used Equipment Inventory
Inline Cleaners
1997 Technical Devices 318, In•Line Cleaner, S/N # 4997•360:
|
|
10 HP Wash and Rinse Pump, 3•10 HP Turbine Dryers, 18” Dual Belt,
480 Volt, 145 FLA, Excellent Condition, located in Orange County, 15’
|
1997 Technical Devices 318, In•Line Cleaner, S/N # 4997•370:
|
|
10 HP Wash and Rinse Pump, 3•10 HP Turbine Dryers, 18” Dual Belt,
480 Volt, 145 FLA, Excellent Condition, located in Orange County, 15’
|
1997 John Treiber, Power Miser, In•Line Cleaner, Refurbished:
|
|
10 HP Wash and 5 HP Rinse Pump, 20 HP Turbine Dryer, 18” Belt,
480 Volt, Completely Refurbished with Warranty, located in Orange County, 12’
|
Wave Solder Machines
2001 Electrovert Econopak Plus 18" Dual Wave Solder Machine.
|
|
• Lead Free and Nitrogen Ready.
• 18” Dual Wave.
• Finger•Finger•Pallet Conveyor.
• External spray fluxer.
• 3 Bottom convection pre•heaters.
• 3 top deflector plates.
• Finger cleaner.
• Motorized solder pot (in•out, up•down).
• 12' 7" in length rail to rail, 5' wide, 7' wide with solder pot roll out.
• 380 volts, 3 phase, 75 amps.
• S/N: RK•1110074•01.
• Located in Orange County.
|
Technical Devices Nu/Era Jr. Wave, can be Upgraded for Lead Free
|
|
Foam Fluxer, 3’ Preheat, Dual Wave, Completely Refurbished, 220 Volt, 40 amps
|
Reflow Ovens
2000 Electrovert Omni Flow 10, Reflow Oven, Serial Number #
|
|
Very Good Shape, Rail Only Machine, Non • Nitrogen, Located in Northern California
|
1999 Electrovert Omni Flow 10, Reflow Oven, Serial Number #
|
|
Very Good Shape, Rail Only Machine, Non • Nitrogen, Located in Northern California
|
1999 Conceptronic HVA•102 Reflow Oven, S/N # 9200177
|
|
7 Zones of Convection Reflow, Top and Bottom, Mesh Belt configuration, Left to Right
flow, Polaris & Extended Cooling 440 Volt, 90 amps, 17’ long, located in San Jose
|
X•Rays
1998 Faxitron CS – 100 AC, X•Ray System, Serial Number # IIC•1: BRAND NEW
|
|
Kevex 926, 90 kVA Tube, 18” X 24” Table, 4” Image Intensifier,
3X – 140X Magnification, Tube Z – Axis Control, 2” FOV, Tilt & Rotate Fixture
|
Stencil Cleaners
Smart Sonic Stencil Model 5000
|
|
• Model 5000.
• 120 Volt, 30 amps.
• Length: 4' 4", Width: 5' 3".
• Located in San Jose.
|
Rework Stations
None at this time.
Pick and Place
2000 Fuji IP•III, Flexible Mounter, Serial Number #
|
|
Very Good Shape, MTU with BGA Clamper, 2 – MFU’s, 4800 Vision Card,
Complete set of Nozzles, Located in Northern California
|
1999 Fuji IP•III, Flexible Mounter, Serial Number #
|
|
Very Good Shape, MTU with BGA Clamper, 2 – MFU’s, 4800 Vision Card,
Complete set of Nozzles, Located in Northern California
|
Feeders
|
|
Over 300 HSP and Sanyo Chip Shooter Feeders
Over 100 Juki Feeders
|
Screen Printers
11/2004 MPM AccuFlex, In•Line Screen Printer, S/N # AFMMI•100195:
|
|
2D Post Solder Inspection, Vacuum Stencil Under Wipe, 8.4 Version Software,
Like New Condition, San Jose
|
2000 MPM UP•1500 In•Line Screen Printer
|
|
2D Post Solder Inspection, Automatic Tooling Pin Placement, SPC Option, Vacuum Stencil
Under Wipe, Software Version 6.36.00, Refurbished, Very Good Condition, San Jose
|
2000 MPM UP•1500 In•Line Screen Printer
|
|
2D Post Solder Inspection, Automatic Tooling Pin Placement, SPC Option, Vacuum Stencil
Under Wipe, Software Version 6.36.00, Refurbished, Very Good Condition, San Jose
|
Conveyors
Conveyor Technologies Conveyors, All Types
|
|
Bare Board Loader, Lift Gate, Flip Station, Slide Gate, Workstations, etc.
|
*** Brand New *** Conveyors
|
|
1.0 Meter & 0.6 Meter Buffer Conveyors, Wave Exit and Entrance Conveyors
|
Consignment Inventory
Juki KE•760L, Flexible Mounter, S/N # 760•E2153
|
|
Good Condition, 220 Volt
|
Juki FS•750, Flexible Mounter, S/N # 750•B1286
|
|
Good Condition, 220 Volt
|
Juki FS•750, Flexible Mounter, S/N # 750•XXXXX
|
|
Good Condition, 220 Volt
|
Juki KS•1700, In•Line Printer, S/N # 170•E1075
|
|
Good Condition, 220 Volt
|
Juki TR•5S, Matrix Tray Handler, S/N # TR8•5063
|
|
|
Juki TR•5S, Matrix Tray Handler, S/N # TR8•5068
|
|
|
1996 Mydata TP•11, Pick and Place, Good Running Condition:
|
|
2.0.11 TPSYS Software, 3 Magazines with the System, 15” X 20” Table,
FP Vision Option, 2 – Pole Electrical Tester Option, Located in San Jose
|
Other Equipment
1999 Trek ICOM 5000 Cleanliness Tester
|
|
• Excellent Condition.
• S/N: 15M/799/113.
• Located in San Jose.
|
2000 Speedline, Camalot 2800, Glue Dispenser, S/N # 2800•1100259•01:
|
|
2D Post Solder Inspection, Automatic Tooling Pin Placement, SPC Option, Vacuum Stencil
Under Wipe, Software Version 6.36.00, Refurbished, Very Good Condition, San Jose
|
Unit Design Batch Cleaner, Good Running Condition
|
|
Located in San Jose
|
|