Engineering Services and Product Assistance
1-540-731-0540

DA3000, DA6000
DA3000 The DA-3000 and DA-6000 are high performance digital servo drives that are designed for a variety of direct axis and spindle drive applications. The DA series integrates digital position and velocity control with integral power supplies and the latest in pulse width modulated servo technology. This results in a motor drive ready to meet the most demanding control challenges.
DA motor controllers meet the needs of system designers and machine builders who must interface to a variety of control options. Reliability and small package size are achieved through the use of surface mount technology and minimal internal wiring. These construction techniques provide an economical use of valuable panel space. All DA series controllers are stand-alone units that are capable of interfacing to serial interfaces, CNCs, PLCs and motion controllers. DA6000

Features

Diagnostic and Monitoring Features

  • I2T thermal protection circuit
  • Missing and mis-phased control signal detection (Hall effects, RS232, Encoder, Resolver)
  • Readback of heatsink temperature
  • Average current readback
  • Ability to view internal DSP variables through the use of a dedicated test point DAC
  • Regen overload detection
  • Power supply failure detection
  • Motor thermistor interlock and general purpose interlock

Performance and Characteristics

Amplifiers Performance DA3000 DA6000
Output Current50A cont; 100A peak for 2 sec. 80A cont; 160A peak for 2 sec.
Input Power Requirement 100-250 Vac, 3 phase
PWM Frequency 18-35 KHz
Bandwidth Up to 4KHz
Efficiency >95%
Physical Dimensions
Length15.35"(389.98mm)
Width6.25"(261.75mm)
Depth9.86"(250.49mm)
Length15.35"(389.98mm)
Width 6.25"(261.75mm)
Depth10.5"(266.70mm)

Home | About MCS | Contact Us
© 2014 Motion Control Systems Inc.
CSS Menu by OpenCube