2SI-6/8 Loading time of “zero” seconds. Packages are available with robots due to its distinguished robot compatibility. It is also very easy to use as a manual loading machine.

Large parts and long shaft parts require a long non-cutting time for loading and chucking.

This machine is optimal for this kind of work.

“Zero loading” and OP10 and OP20 interprocess machining eliminate lost time, which can help you who want to reduce cycle time.

This machine has three stations, divide hole process into 3 rooms. A maximum of 20 cutting tools can be mounted for single operation.   

This machine achieves ultra-high efficiency because it has four stations where machining processes OP10 and OP20, loading, and parts reversing are performed simultaneously.

A vertical type 4-spindle lathe is suitable for mass production of large parts that require longer Loading time.

Two machining processes can be performed at a single machine.

6-spindle lathe bar machine with a C-axis milling function.

High-end model equipped with a built-in spindle motor.

This series is a 6-spindle lathe bar machine (with automatic bar feeder) and is available in three models depending on the bar diameter.

For small diameter＜B6-16＞
For medium diameter＜B6-27＞
For large diameter＜B6-32＞

The world’s first Multi-spindle lathe with CNC equipment developed and produced by Shimada.

A 6-spindle lathe that specializing in machining irregular-shaped workpieces.

This machine uses eight spindles to divide the process into eight.

Rough machining is performed at the no NC slide, and finish process is at the NC slide.