How to find World Wide Name (WWN) for a fibre channel HBA

You can uses one of the following ways to view WWNs:

• HBAnyware/OneCommand utility (Emulex HBA only)
• QConvergeConsole (Qlogic HBA only)
• SAN switch name server information

If none of the above mentioned tools are accessible you can try Fibre Channel Information Tool utility FCINFO.EXE available for download from Microsoft Download web site. It works on Microsoft Windows Server 2003 and Microsoft Windows 2000 systems and comes in a form of MSI package for x86, IA64 or x64 platforms. However, as stated in the Release Notes the Fibre Channel Information Tool does not have to be installed to work correctly. Three core files must be copied in a common folder if the Fibre Channel Information Tool is not installed using the MSI installer: FCINFO.EXE, HBAAPI.DLL, HBATAPI.DLL.

Fibre Channel Information Tool utility was also included in the Microsoft Product Support Reporting Tool and other vendors' reporting tools, such as EMC Grab Utilities (EMCReports), Hewlett Packard Services Reporting Tool (HPS Reports), etc. If you ever run one of those tools on your server, you would have FCINFO.EXE installed.

Update: Microsoft Product Support Reporting Tool is no longer available. Use Microsoft Diagnostic Tool (MSDT) - Baseline Reports Diagnostic Package instead.

Running the Fibre Channel Information Tool at a command line with no arguments will give basic information (including WWN) about the installed host bus adapters (HBAs):

If you type FCINFO /? or FCINFO /?? you will get a long list of commands, many of which are very task specific and are not required for information gathering.

On a Linux or UNIX system WWNN and WWPN are recorded in the messages log file when HBA driver is loaded during boot process. To find WWNN/WWPN search messages file for HBA driver name or "wwnn" pattern:

For more detail and other methods check the following links:
Locating the WWPN for a Linux host
Locating the WWPN for a Sun SPARC host