Today on 5G tech World
Report indicates 5G-Advanced forms the foundation for 6G
As 5G-Advanced evolves and transitions to 6G, standards and pre-standards bodies have begun to align on the new features and enhanced capabilities that will define the next generation of wireless. A new report commissioned by InterDigital, Inc. introduces the enhancements to 5G capabilities and the novel features of integrated sensing and communication, native AI, and…
How GaN PAs in 5G radios push test requirements
Proper PA development, validation, and characterization are important because a PA often accounts for a significant portion of a transmitting device's power consumption.
5G software stack runs on small cell PHY SoC
Integrate a 5G Open RAN L1-L3 software stack into a small-cell design.
How mmWaves affect cables, connectors, and PCB traces
Millimeter-wave signals used in 5G networks provide wide bandwidth and high data rates. Signal losses, both over the air and through interconnects, bring design challenges.
Mixer converts 20 GHz to 80 GHz frequencies down to IF
mmTron Inc. announced an innovative active mixer providing frequency conversion from 20 to 80 GHz. In addition to its bandwidth, the TMC170D stands out with 0 dB average conversion loss across the band with an LO drive of only 0 dBm. The InP semiconductor-based design achieves RF and LO coverage from 20 to 80 GHz…
6G: Sub-THz device reaches 100 Gbps data rate
NTT DOCOMO, INC., NTT Corporation, NEC Corporation, and Fujitsu Limited jointly announced the development of a top-level wireless device capable of ultra-high-speed 100 Gbps transmissions in the 100 GHz and 300 GHz sub-terahertz bands. The four companies have been jointly conducting R&D on sub-terahertz devices since 2021 in anticipation of the coming 6G era. To…
Sponsored Content See More >
Positioning in 5G NR – A look at the technology and related test aspectsPositioning technologies will continue to play an essential role in future wireless communications systems. The influence of these technologies is…
5G Connectors: Enabling the global 5G visionBy Travis Amrine, Global Industry Marketing Manager, I-PEX In 2019, 5G started large commercial deployments globally. What led us to…
White paper: 5G evolution – on the path to 6G5G is now and what’s next? 5G deployments have only recently started, and releases beyond R15 will continue to tap…
Devices See More >
Integrated into IoT devices, iSIM poised to make inroads
Power, price, security, and easy deployment could lead IoT companies to adopt iSIM over eSIM and plastic SIM cards.
IoT See More >
Two Bluetooth modules bring high-end MCU, low power to IoT devices
u-blox has announced two additions to its Bluetooth LE portfolio, ALMA-B1 and NORA-B2. The modules are based on the latest generation nRF54 Series Systems-on-Chip (SoCs) from Nordic Semiconductor. They both support Bluetooth LE 5.4 and Thread/Matter technologies in a compact, power-efficient, and secure format. ALMA-B1 and NORA-B2 are designed for a wide range of IoT applications, including…
RF See More >
How mmWaves affect cables, connectors, and PCB traces
Millimeter-wave signals used in 5G networks provide wide bandwidth and high data rates. Signal losses, both over the air and through interconnects, bring design challenges.
Wireless Design and Development See More >
6G: Sub-THz device reaches 100 Gbps data rate
NTT DOCOMO, INC., NTT Corporation, NEC Corporation, and Fujitsu Limited jointly announced the development of a top-level wireless device capable of ultra-high-speed 100 Gbps transmissions in the 100 GHz and 300 GHz sub-terahertz bands. The four companies have been jointly conducting R&D on sub-terahertz devices since 2021 in anticipation of the coming 6G era. To…
Radar See More >
New Signal Hound CEO to focus on strategy, marketing, sales
In a video interview, Harrison Osbourn explains that he handle the CEO-level functions while Tom Lane takes over as president.
